NENSA EASTERN CUP OPENER - CLASSIC SPRINT

Glide wax recommendations

Clean glide zones with I84 Glide Wax Cleaner. Let dry and brush glide zones.
Iron in HF8BWX with iron set at 120C. Let skis cool, then scrape and brush.
Iron in FC8X Cera F powder with iron set at 165C. Let skis sit for 30 minutes then brush out powder using a horsehair or wild boar brush and polish with blue nylon brush.
Apply one layer of HVC Warm Liquid. Let dry.

Kickwax recommendations

Clean kick zones using wax remover. Let dry then sand kick zone with 120 grit paper.
Apply KB20 Green Klister spray binder to kick zone. One thin, even layer.
Apply a very thin layer of KX35 Special Violet klister over the KB20. Make sure it is a thin layer. Let skis cool.
For the race, if it is not snowing, use a thin layer of KX45 Violet klister with some dots of KX65 Red klister mixed in. If it is snowing, use KX45 Violet klister straight. Let it cool, then apply 1-2 layers of VR62 over KX45. Cork each layer lightly.