SNOWSHOE THOMPSON CLASSIC
Glide wax recommendations
Base Layer- CH8XLF Layer- LF8X
HF Layer- HF8X
Cera F Layer- FC8X Cera F Powder or FC8XS Solid Warm Turbo Block. If using FC8X powder, iron in at 165C, let cool, then scrape and brush. If using FC8XS block, apply and either roto fleece or hand cork then brush out.
Kickwax recommendations
Clean kick zones with base cleaner and let dry. Roughen kick zones with 120 grit sand paper.Binder Layer- Apply one thin layer of VG35 Green base binder. Iron in, then smooth with a cork and let cool outside.
Kicking Layer- Apply 2-4 layers of VR50. Cork each layer smooth and let cool.
Note- For added speed, apply one layer of VX53 over VR50, cork smooth and let cool. VX53 is fast and will not affect your kick.
